Furnace Repair in Burbank, IL
When your furnace won’t ignite, blows cold air, or trips the breaker, Clucas Mechanical provides fast, safe furnace repair in Burbank, IL. Our licensed techs diagnose both the immediate fault and any underlying airflow, venting, or control issues so the fix lasts through winter.
Common furnace problems we fix:
- Furnace not igniting or short cycling
- Intermittent heat—runs then shuts down
- Blower runs but no warm air
- Loud startup, banging, or high‑pitched whine
- Igniter, flame sensor, or pressure switch failure
- Condensate drain faults on high‑efficiency units
- Control board and thermostat issues
What you can safely check first:
1) Replace the filter if dirty. Restricted airflow causes overheating and short cycling.
2) Confirm the thermostat is set to Heat and above room temp; replace batteries if applicable.
3) Check the furnace switch and breaker are on. If a breaker is tripped, reset once only.
4) High‑efficiency units: verify the PVC intake/exhaust outside is free of snow/debris.
Typical repair ranges (after diagnosis):
- Flame sensor or igniter: $180–$380
- Pressure switch, inducer cleaning, or condensate clear: $220–$550
- Blower motor (PSC/ECM varies): $480–$1,100
- Control board or gas valve: $480–$1,200
Our approach for Burbank homes:
Many local ranch and bungalow homes have older return setups and narrow filter racks that restrict airflow. We evaluate static pressure and duct conditions along with the failed part. Correcting airflow—larger media filter, return upgrades, or balancing—prevents repeat overheating and extends equipment life.
Safety first:
- Combustion checks and CO safety testing
- Proper venting slope and freeze‑risk checks on condensing furnaces
- Gas piping leak test after repairs
Repair vs replace:
If your furnace is 15+ years old or needs a major component, we’ll compare repair vs. replacement honestly. If a replacement makes sense, we size correctly and provide efficient options with clear warranties.
Time to restore heat:
Most repairs complete in 1–3 hours when parts are on the truck. If a special‑order component is required, we source quickly from Chicago‑area suppliers and provide temporary options if possible.
Call (708) 555‑0137 or request service online. We’re nearby and ready to help—daytime and emergency support available.
Helpful Links
Frequently Asked Questions
- How fast can you arrive for furnace repair in Burbank?
In most cases we can arrive same day in Burbank. For emergencies during extreme temperatures, we prioritize rapid response within 2-4 hours when available. - What areas around Burbank do you serve?
We serve Burbank and all surrounding Southwest Chicago suburbs including Burbank, Oak Lawn, Chicago Ridge, Evergreen Park, Bridgeview, Worth, Alsip, Hickory Hills, Palos Hills, and Bedford Park. - Do you service all HVAC brands?
Yes. We service all major brands including Carrier, Trane, Lennox, Bryant, Goodman, Amana, Rheem, Ruud, York, Payne, Mitsubishi, and Daikin. Our technicians carry parts for the most common models. - What are typical furnace repair costs in Burbank?
Minor repairs typically range $150–$450; major component repairs $600–$1,200+. New installations vary by size and efficiency, typically $3,800–$12,000. We always provide upfront pricing after diagnosis. - What warranty do you offer?
All repairs include a 1-year workmanship warranty. Parts carry the manufacturer warranty (typically 5-10 years). Extended warranties available with our maintenance plans. - Do you offer financing options?
Yes, we offer flexible financing with approved credit. Monthly payment plans available for repairs over $500 and all new installations. Ask about current promotions. - Are your technicians licensed and insured?
Absolutely. All our technicians are fully licensed (IL HVAC Lic #XXXXXX), bonded, and insured. We carry general liability and workers compensation insurance for your protection. - Do you charge for diagnosis or estimates?
We charge a diagnostic fee of $89-$149 which covers the service call and comprehensive system evaluation. This fee is waived if you proceed with the recommended repair. - How long does furnace repair typically take?
Most repairs take 1-3 hours once we identify the issue. Complex repairs or special-order parts may require a follow-up visit. - What payment methods do you accept?
We accept cash, checks, all major credit cards (Visa, Mastercard, Discover, American Express), and offer financing options for larger projects. - What should I do before you arrive for furnace repair?
Clear the area around your HVAC equipment, ensure pets are secured, and make note of any specific symptoms or concerns you've observed. Don't worry about cleaning—we'll handle that. - Do you offer emergency service?
Yes, we offer 24/7 emergency service for heating failures in winter and AC failures during heat waves. Emergency service rates apply for after-hours calls. - What's included in your furnace repair service?
Complete diagnosis, explanation of the problem, upfront pricing, quality repair with OEM or better parts, system performance testing, and customer walkthrough. - How often should I schedule HVAC maintenance?
We recommend annual maintenance before each season—AC tune-up in spring, furnace tune-up in fall. Bi-annual maintenance plans provide the best protection and priority service. - Do you provide free estimates for furnace repair?
We charge a diagnostic fee for repair visits, but provide free estimates for system replacements when your equipment is beyond economical repair. - What makes you different from other HVAC companies?
We focus on education over sales, provide upfront pricing, use quality parts, and stand behind our work with strong warranties. We're local, family-owned, and invested in our community. - Can you help if another company couldn't fix my AC?
Yes, we often solve problems other companies miss. Our technicians receive ongoing training and use advanced diagnostic tools to identify root causes, not just symptoms. - Do you offer maintenance plans?
Yes, our maintenance plans include priority scheduling, discounted repairs, annual tune-ups, and extended warranties. Plans start at $149/year and can save hundreds on repairs. - How do I know if I need repair or replacement?
We use the 50% rule: if repair costs exceed 50% of replacement value AND your system is 12+ years old, replacement usually makes more sense. We'll explain all options honestly. - What energy efficiency ratings should I look for?
For AC units, look for SEER 16+ (highest efficiency is SEER 25+). For furnaces, 95+ AFUE for maximum efficiency. We'll help you balance efficiency with budget and payback period. - Can you work on systems another company installed?
Absolutely. We service and repair HVAC systems regardless of who installed them. Many customers switch to us after poor experiences with other contractors. - Why won't my furnace ignite?
Common causes include failed igniter, flame sensor issues, gas supply problems, or pressure switch faults. High-efficiency furnaces can also have condensate drain blockages. - Why does my furnace blow cold air?
This usually indicates a failed igniter, gas valve issue, or flame sensor problem. The blower runs but the burners don't ignite. - Is a yellow furnace flame dangerous?
Yes. A yellow or flickering flame indicates incomplete combustion and potential carbon monoxide risk. Turn off the furnace and call immediately. - Why does my furnace keep shutting off?
Short cycling can be caused by dirty filters, closed vents, oversized equipment, or malfunctioning limit switches. This should be diagnosed by a professional. - How long does it take to schedule furnace repair in Burbank?
Most service calls can be scheduled same day or next day. Emergency calls are prioritized and we aim for 1-4 hour response during business hours. - What hours are you available for furnace repair?
Regular business hours are Monday-Friday 7AM-7PM, Saturday 8AM-4PM. Emergency service is available 24/7 for heating failures in winter and AC failures during extreme heat. - Will you call before arriving for furnace repair?
Yes, our technician will call 15-30 minutes before arrival to confirm you're home and ready for service. - How long have you been providing furnace repair?
We've been serving Burbank and surrounding areas since 2008, with over 15 years of experience in residential and commercial HVAC. - Do you offer senior or military discounts for furnace repair?
Yes, we offer special discounts for seniors (65+) and active military/veterans. Ask about current promotions when scheduling. - Is there a warranty on furnace repair?
All repairs include 1-year workmanship warranty. New installations come with manufacturer parts warranty (5-10 years) plus 1-year labor warranty. Extended warranties available. - What if I'm not satisfied with the furnace repair?
Your satisfaction is guaranteed. If you're not happy with our work, we'll return to make it right at no additional charge. We stand behind every job. - Can I get a quote over the phone for furnace repair?
We can provide general price ranges over the phone, but accurate quotes require on-site inspection to assess your specific system, home size, and any unique requirements.