Water Heater Installation in Burbank, IL
Need a new water heater? Clucas Mechanical provides expert water heater installation in Burbank, IL with same-day service on standard tank replacements. We install traditional tank water heaters, tankless models, and hybrid heat pump units—all with professional installation, complete permitting, and comprehensive warranties.
Signs You Need Water Heater Replacement
Replace your water heater if you experience:
- Age 10+ years – Most tank water heaters fail by year 12
- Rusty or discolored water – Indicates corroded tank interior
- Water leaking from tank – Internal tank rust cannot be repaired
- Strange noises – Popping, rumbling suggests sediment buildup
- Inconsistent hot water – Failing heating elements or thermostat
- Not enough hot water – Undersized tank or declining capacity
- Rising energy bills – Sediment reduces efficiency over time
Types of Water Heaters We Install
Traditional Tank Water Heaters
Best for: Most Burbank homes, budget-conscious homeowners
- 40-50 gallon capacity standard for 2-4 person homes
- Gas or electric models
- Reliable, proven technology
- Lower upfront cost
- Fast recovery time with gas models
- 8-12 year lifespan
- Cost: $1,200-$2,500 installed
Tankless Water Heaters
Best for: Energy savings, unlimited hot water, space savings
- Endless hot water—never run out
- 20-30% more energy efficient than tank models
- Wall-mounted saves floor space
- 15-20 year lifespan
- Lower operating costs
- Gas or electric models
- Higher upfront cost but better long-term value
- Cost: $2,800-$5,500 installed
Hybrid Heat Pump Water Heaters
Best for: Maximum energy savings with electric
- 50-80 gallon capacity
- Uses ambient air heat (like mini fridge in reverse)
- 2-3 times more efficient than standard electric
- Requires adequate space and ventilation
- Utility rebates often available
- Cost: $2,200-$3,800 installed
Professional Water Heater Installation Process
Our complete installation ensures safety and code compliance:
- Assessment – Evaluate current water heater, location, and fuel source
- Size recommendation – Determine proper capacity based on household size and usage
- Equipment selection – Gas vs. electric, tank vs. tankless
- Written estimate – Transparent pricing including all labor, materials, permits
- Scheduling – Often same-day for tank replacements
- Installation
- Safely drain and remove old water heater
- Inspect and upgrade gas line or electrical if needed
- Install new water heater per code requirements
- Connect water supply with expansion tank
- Install temperature & pressure relief valve
- Connect venting (gas models)
- Test for leaks (gas and water)
- Testing & startup – Verify proper operation and temperature
- Cleanup & disposal – Remove old unit and haul away
- Homeowner training – Operation, temperature adjustment, maintenance tips
- Permitting – We obtain required permits and schedule inspections
Choosing the Right Water Heater Size
Tank Water Heaters:
- 1-2 people: 30-40 gallon
- 2-3 people: 40-50 gallon
- 3-4 people: 50-60 gallon
- 5+ people: 60-80 gallon
Tankless Water Heaters:
Sized by flow rate (GPM - gallons per minute):
- 1-2 bathrooms: 6-7 GPM
- 2-3 bathrooms: 7-9 GPM
- 3-4 bathrooms: 9-11 GPM
Gas vs. Electric Water Heaters
| Feature | Gas Water Heater | Electric Water Heater |
|---|---|---|
| Operating Cost | Lower (gas cheaper) | Higher (electric costs more) |
| Recovery Speed | Faster | Slower |
| Installation Cost | Higher (venting required) | Lower (simpler install) |
| Efficiency | 60-70% (tank) / 95%+ (tankless) | 90-98% (tank) / 99% (tankless) |
| Lifespan | 8-12 years (tank) | 10-15 years (tank) |
| Venting | Required | Not required |
Tank vs. Tankless: Which Is Right for You?
Choose Tank Water Heater If:
- Lower upfront cost is priority
- You have adequate space (closet, basement, garage)
- Simple replacement of existing tank
- Standard hot water usage (showers, dishes, laundry)
Choose Tankless Water Heater If:
- You want unlimited hot water
- Long-term energy savings matter
- Space is limited (wall-mounted)
- You frequently run out of hot water
- You want 15-20 year equipment life
Common Water Heater Upgrades
Enhance your new water heater with these upgrades:
- Expansion tank – Protects plumbing from thermal expansion (often required by code) - $150-$300
- Water softener – Extends water heater life by preventing mineral buildup - $800-$2,500
- Recirculation pump – Instant hot water at every faucet - $400-$1,200
- Upgraded anode rod – Powered anode extends tank life 5+ years - $300-$500
- Smart leak detector – Alerts to leaks and auto-shuts water supply - $200-$600
Water Heater Maintenance
Extend water heater lifespan with annual maintenance:
- Tank water heaters:
- Flush tank annually to remove sediment
- Check/replace anode rod every 3-5 years
- Test temperature & pressure relief valve
- Insulate hot water pipes for efficiency
- Tankless water heaters:
- Descale unit annually (especially with hard water)
- Clean inlet screen filter
- Check for error codes
- Verify proper venting
Our maintenance plans include annual water heater service with priority scheduling.
Emergency Water Heater Replacement
Water heater failed? We offer emergency replacement service:
- Same-day installation on standard tank replacements
- Fast response for leaking water heaters
- Temporary shut-off assistance to prevent water damage
- Fully stocked trucks with common sizes
Call (708) 674-3600 for emergency water heater service.
Financing & Rebates
Make water heater replacement affordable:
- Flexible financing – Monthly payment options with approved credit
- Utility rebates – Rebates available on high-efficiency and hybrid models
- Tax credits – Federal tax credits for qualifying heat pump water heaters
Learn more about financing options.
Why Choose Clucas Mechanical for Water Heater Installation?
- Same-day service – Fast installation on tank replacements
- Licensed & insured – Professional plumbing and HVAC contractors
- All types installed – Tank, tankless, and hybrid models
- Code-compliant work – Proper venting, expansion tanks, permits
- Quality brands – Rheem, Bradford White, Rinnai, Navien, AO Smith
- Transparent pricing – Written estimates with no hidden fees
- Comprehensive warranty – Manufacturer parts + workmanship coverage
- Local Burbank service – Fast response and ongoing support
Frequently Asked Questions
- How much does water heater installation cost in Burbank?
Standard tank water heaters: $1,200-$2,500 installed (40-50 gallon). Tankless water heaters: $2,800-$5,500 installed depending on size and fuel type. Price includes removal of old unit, installation, permitting, and startup. - How long does water heater installation take?
Standard tank replacement: 2-4 hours. Tankless installation: 4-8 hours (longer if converting from tank to tankless or upgrading gas line/electrical). - Should I choose tank or tankless water heater?
Tank heaters cost less upfront and work for most homes. Tankless provide endless hot water, save space, and reduce energy bills 20-30% but cost more initially. Best choice depends on usage, budget, and space availability. - How long do water heaters last?
Tank water heaters: 8-12 years average. Tankless water heaters: 15-20 years. Regular maintenance (annual flushing, anode rod replacement) extends lifespan significantly. - Do you offer same-day water heater installation?
Yes. For standard tank replacements, we often install same day if we have your size in stock. Tankless installations require more time for gas/electrical upgrades and are typically scheduled 1-3 days out.
Schedule Water Heater Installation Today
Don't suffer through cold showers. Call (708) 674-3600 for fast, professional water heater installation in Burbank. Same-day service often available!